DEENFRITUSA

Construction industry.

Tiling components.


Buildings must be constructed in such a way that no damage can be caused by water, moisture or other influences. Bathrooms, showers, balconies or industrial wet areas must therefore be protected accordingly. Particular care must be taken with the joints, corners, wall penetrations and floor drains. This is normally done using sealing materials which can be applied by brush or spatula, or sealing tapes supplied on rolls.

Jaeger develops, produces and distributes components such as sealing tapes, corners, wall and floor collars as well as sealing and uncoupling membranes. Over the past 15 years, we have developed more than 1,000 different product and detail solutions. In close co-operation with test institutes and approval authorities, national approvals for many countries are audited by several external testing agencies. Our service is thereby integrated in our customer's quality management systems as we carry out tests, issue test certificates and handle production controls.

Application film
Application instructions

Sealing and uncoupling membranes

Sealing and uncoupling membranes offer an economical alternative to sealing systems applied by brush or spatula. Usually attached to the substrate by tile adhesive, they can be directly tiled and jointed. Sealing membranes primarily ensure protection from moisture while uncoupling membranes offset the varying physical behaviour by the substrate and the ceramic covering. The advantages in comparison to sealing systems applied by brush or spatula lie in the consistent thickness of the sealing layer and no delay because of drying times. Easy and fail-safe application and the time saved offer significant benefits. Jaeger offers sealing and uncoupling membranes for various areas of application, with a matching mortar system or self-adhesive.

 

> Products

Sealing tapes

Special sealing tapes are available for sealing corners and joints. These Jaeger products are carefully designed to ensure exact compatibility with the other building materials involved and according to the relevant moisture stress classes. We give extensive advice to our customers in the selection of components for the relevant application. In our own application technology facilities, we investigate the suitability of the entire system according to specific customer testing standards, DIN testing procedures and ETAG directives.The material combinations of sealing tapes and accessory products are divided into platforms. More information on the platforms is available here. 

 

> Products

Application film
Application instructions
Platforms

Corners

We offer inside and outside sealing corners. The use of these prefabricated products represents essential savings in time on the building site. Compatibility in the sealing system is also co-ordinated to the remaining components.

Collars

We produce various collars for easy sealing of pipe penetrations. For all standard pipe diameters or as expansion zone collars. We also offer numerous specially-formed floor collars and special parts for fast sealing of channels and drains.

These components complement our customers' products to produce entire systems which enable safe and feasible work on site.

 

 

Application film
Application instructions