DEENFRITUSA

Construction industry.

Airtight components.


Air-tightness is an increasingly important aspect in constructing and refurbishing buildings. An air-tight building shell prevents moisture from penetrating from the outside and thermal energy from dissipating from within. We have extended our range of products for the construction industry to include components for airtight buildings. We offer individual products and solutions for achieving an airtight building shell.

Our range currently comprises components for airtight connections and airtight spot penetrations. Self-adhesive sealing tapes for sealing windows and complex components as well as easily-processed system components, e.g. corners and collars for wall and cable penetrations.

Subsequent installation

In the case of subsequent installation, the window sealing tape is adhered directly to the window frame approx. 15 - 20 mm. The other side is adhered to the masonry and is immediately plasterable.

Installation with the window

When installing with the window, the tape is adhered to the end face of the frame and then turned over by 180 °. A loop must be formed in the corner area. Advantage: no edge is created.

Window Sealing Tape Outside (SD-Value 1)

Polyurethane film covered on both sides with non-woven for diffusion-open, outside sealing of
window joints according to DIN 4108-7, EnEV and RAL-guidelines.

- Adhesive coating optionally fully-coated,
  20 mm strip or coating on both sides.
- Tape width: 70/100/150 mm
- Roll length: 25 m
- Other dimensions possible.
- Butyl adhesive strip on demand.

Window Sealing Tape
Inside (SD-Value 50)

Polyethylene film covered on both sides with non-woven for diffusion-inhibiting, inside sealing of
window joints according to DIN 4108-7, EnEV and RAL-guidelines.

- Adhesive coating optionally fully-coated,
  20 mm strip or coating on both sides.
- Tape width: 70/100/150 mm
- Roll length: 25 m
- Other dimensions possible.
- Butyl adhesive strip on demand.

Window Sealing Tape Vario Inside/Outside
(SD-Value variable)

Polyamide film covered on both sides with non-woven and variable SD-Value for sealing
outside as well as inside window joints according to DIN 4108-7, EnEV and RAL-guidelines.

- Adhesive coating optionally fully-coated,
  20 mm strip or coating on both sides.
- Tape width: 70/100/150 mm
- Roll length: 25 m
- Other dimensions possible.
- Butyl adhesive strip on demand.

Window Sealing Tape Inside Aluminum
(SD- >1500)

Aluminum film covered on both sides with non-woven for inside, diffusion-resistant sealing of window joints according to DIN 4108-7, EnEV and RAL-guidelines. For metal and winter garden constructions particularly.

- Adhesive coating optionally fully-coated,
  20 mm strip or coating on both sides.
- Tape width: 70/100/150 mm
- Roll length: 25 m
- Other dimensions possible.
- Butyl adhesive strip on demand.

Coating variants

20 mm strip

Variant with a one-sided 20 mm self-adhesive strip on hotmelt base.

Fully-coated

Fully-coated variant in the widths 70, 100 or 150 mm on hotmelt base.

Coating on both sides

Variant with full-surface coating on one side and 20 mm strip coating on the other side. Coating on hotmelt base.

Self-adhesive perfo collar

We offer self-adhesive collars for airtight sealing of cable or pipe penetrations. This clever design permits swift, easy and safe sealing of existing pipe and cable penetrations.

Application film

Self-adhesive sealing corner

We offer self-adhesive sealing corners for airtight sealing of corner installations. These easy-to-install system components represent significant savings in time and dispense with tape patches which are susceptible to faults.

Application film